TP-Link TL-WR842ND Quick Installation Manual

Quick Installation Guide

300Mbps Multi-Function Wireless N Router
TL-WR842ND
MODEL NO.
2
Con guration by Setup Wizard
The Easy Setup Assistant is not supported in Linux or Mac OS. If you are runing without CD-ROM, please refer to Appendix 2.
Insert the TP-LINK Resource CD into the CD-ROM drive.
1
Select TL-WR842ND and click Easy Setup Assistant.
2
7106503674

Package Contents

TL-WR842ND
Power Adapter
Ethernet Cable Resource CD
300Mbps Multi-Function Wireless N Router
MODEL NO. TL-WR842ND
QIG
Select your language from the drop-down list.
3
Click START and the Easy Setup Assistant will
guide you step by step to set up the Router.
4 Follow the instructions until you see the screen
below. Click FINISH to complete the setup.
1

Hardware Connection

Wall Socket
Internet
Cable/DSL Modem
3
1
Connect the WAN port on your Router to the Modem's
1
LAN port with an Ethernet cable.
Connect your computer to one of the ports labeled 1~4 on
the Router with an Ethernet cable.
To use the Router to share les or printer, plug an external USB hard
drive/USB ash disk into the USB port, or connect a USB printer to the
USB port. For speci c con guration procedures of the USB Printer,
please refer to Appendix 1.
Plug the provided Power Adapter into the POWER jack and
3
the other end to a standard electrical wall socket.
Appendix 1: Con guring the USB Printer
The USB Printer Setup Wizard is currently supported in Windows 7 32bit, Windows Vista 32bit, Windows XP 32/64bit, Windows 2003 and
Windows 2000 . Please follow the steps below to finish the printer configuration.
Insert the TP-LINK Resource CD into the CD-ROM drive.
1
Select TL-WR842ND and click USB Printer Setup.
Click START and the Easy Setup Assistant will guide
2
you step by step to set up the USB Printer.
Computer
2
USB ash disk
USB hard drive
* Some USB hard drives that work at a high
power without using any external power
adapter might not be supported.
Printer
Click Install to install USB Printer software and click
3
FINISH to complete the setup when you see the Finish
page.
After nishing the USB Printer Setup Wizard, you may be
prompted "Found New Hardware" on your desktop.
Please follow the instructions to install suitable driver
for your own printer. After that, users in the LAN can
share the printer via the Router.