Factory Defaults; Backup & Restore - TP-Link TL-WR2543ND User Manual

Loss of power during the upgrade could damage the Router.
5) The firmware version must correspond to the hardware.
6) The upgrade process takes a few moments and the Router restarts automatically when the
upgrade is complete.

4.17.4 Factory Defaults

Choose menu "System Tools → Factory Defaults", and then and you can restore the
configurations of the Router to factory defaults on the following screen
Click the Restore button to reset all configuration settings to their default values.
•
The default User Name: admin
•
The default Password: admin
•
The default Subnet Mask: 255.255.255.0
Note:
All changed settings will be lost when defaults are restored.
4.17.5 Backup & Restore
Choose menu "System Tools → Backup & Restore", and then you can save the current
configuration of the Router as a backup file and restore the configuration via a backup file as
shown in Figure 4-99.
Click the Backup button to save all configuration settings as a backup file in your local
computer.
To upgrade the Router's configuration, follow these instructions.
TL-WR2543ND 450Mbps Dual-Band Wireless N Gigabit Router
Figure 4-98 Restore Factory Default
Figure 4-99 Backup & Restore Configuration
- 103 -