TP-Link TL-WR2543ND User Manual page 24

TL-WR2543ND
Wireless Radio - Choose from the drop-down list to enable or disable the wireless
radio.
Wireless Network Name - Also called the SSID (Service Set Identification). Enter a
value of up to 32 characters. The same name must be assigned to all wireless devices
in your network. Considering your wireless network security, the default SSID is set to
be TP-LINK_XXXXXX (XXXXXX indicates the last unique six numbers of each Router's
MAC address). This value is case-sensitive. For example, TEST is NOT the same as
test.
Region - Select your region from the drop-down list. This field specifies the region
where the wireless function of the Router can be used. It may be illegal to use the
wireless function of the Router in a region other than one of those specified in this field.
If your country or region is not listed, please contact your local government agency for
assistance.
Note:
Limited by local law regulations, version for North America does not have region
selection option.
450Mbps Dual-Band Wireless N Gigabit Router
Figure 3-13 Quick Setup – Wireless
- 17 -