Mac Clone; Wireless - TP-Link TL-WR1043ND - Ultimate Wireless N Gigabit Router User Manual

The Router can not detect PPTP/L2TP/BigPond connections with your ISP. If your ISP uses one
of these protocols, then you must configure your connection manually.

4.5.3 MAC Clone

Choose menu "Network→MAC Clone", you can configure the MAC address of the WAN on the
screen below, Figure 4-13:
Some ISPs require that you register the MAC Address of your adapter. Changes are rarely
needed here.
WAN MAC Address - This field displays the current MAC address of the WAN port. If your
ISP requires you to register the MAC address, please enter the correct MAC address into
this field in XX-XX-XX-XX-XX-XX format(X is any hexadecimal digit).
Your PC's MAC Address - This field displays the MAC address of the PC that is managing
the Router. If the MAC address is required, you can click the Clone MAC Address To
button and this MAC address will fill in the WAN MAC Address field.
Click Restore Factory MAC to restore the MAC address of WAN port to the factory default
value.
Click the Save button to save your settings.
Note:
Only the PC on your LAN can use the MAC Address Clone function.

4.6 Wireless

Figure 4-14 Wireless menu
There are five submenus under the Wireless menu (shown in Figure 4-14 ): Wireless Settings,
TL-WR1043N/TL-WR1043ND
Figure 4-13 MAC Address Clone
-33-
Wireless N Gigabit Router