Command Line Options For Test Expert; Command Line Options For Upgradesync; Command Line Options For Virtual Package Editor - Symantec WISE PACKAGE STUDIO 8.0 - REFERENCE V1.0 Reference

Desired behavior
Change the status of the default
project package, in the default
database, to Available.

Command Line Options for Test Expert

Desired behavior
Run Test Expert on the default project
file.

Command Line Options for UpgradeSync

Option
/yu
Desired behavior
Run UpgradeSync on the default
file name and location.

Command Line Options for Virtual Package Editor

Wise Package Studio Reference
Example command line
path\Manager.exe /x=2 /A="[ApplicationName]" /P="[PackageName]" /
D="[Database]"
The executable that runs Test Expert is TestExpert.exe. There are no options for running
the executable.
See About Test Expert on page 159.
You can use variables to provide information required by the program, as shown in the
following table.
See Wise Package Studio Variables
Example command line
path\TestExpert.exe "[ProjectDir]\[FileName].msi"
The following table lists the command line option you can use with wfwi.exe to run
UpgradeSync.
See UpgradeSync on page 138.
Results
Required option to run UpgradeSync.
Examples
The following table shows how you would use the option above to run this tool, using
variables to provide information required by the program.
See Wise Package Studio Variables
Example command line
path\wfwi.exe /yu "[ProjectDir]\[FileName].msi"
The executable that runs Virtual Package Editor is SVSEditor.exe. There are no options
for running the executable.
See About Virtual Package Editor in the Virtual Package Editor Help.
Wise Package Studio Command Line Options
on page 75.
on page 75.
285