Distribute The Package - Symantec WISE PACKAGE STUDIO 8.0 - GETTING STARTED GUIDE V1.0 Getting Started Manual

Distribute the Package

Wise Package Studio Getting Started Guide
On the All Test Items tab, all files except License.txt should display the Passed
status. Because the License.txt file is not accessed during normal application
execution, it has a Pending status. The test items should look like this:
15. To set the status of the License.txt file to Passed, double-click the License.txt file
on the All Test Items tab.
The Test Item Details dialog box appears.
a. From Status, select Passed.
b. In Test Details, type:
This file is not accessed during normal application execution.
c. Click OK.
16. On the File Coverage page, from Status of Test Case, select Passed.
Note
You might notice that the bold type is removed from all test case names under
Application Execution Tests, which indicates they have been run. This is because all
Application Execution Tests are run simultaneously.
17. Close Test Expert.
For the purposes of this tutorial, you have finished testing the package. Normally, you
would execute all test cases. On the Projects tab, the check box next to the Test package
task is marked to indicate that the task is complete. Next, you will distribute the
package to the share point directory.
In this procedure, you distribute the QuickFacts package to the share point directory so
that it can be imported into the Software Manager database. The Distribute to share
point directory task runs Package Distribution silently, which places the package into a
queue for later import by Software Manager.
Before you follow this procedure, you must have tested the package.
See Test the Package Without Test Expert
Expert on page 68.
on page 66 or Test the Package With Test
Tutorial
70