Chapter 4: Tutorial; About This Tutorial - Symantec WISE PACKAGE STUDIO 8.0 - GETTING STARTED GUIDE V1.0 Getting Started Manual

Chapter 4
Tutorial

About This Tutorial

Wise Package Studio Getting Started Guide
This chapter includes the following topics:
About This Tutorial on page 55
Before You Start on page 56
Import a Sample Package into Software Manager
Create a New Project
Create the Package with SetupCapture
Edit the Package in Windows Installer Editor
Validate the Package
Test the Package Without Test Expert
Test the Package With Test Expert
Distribute the Package
Import the Package into Software Manager
Resolve Conflicts with ConflictManager
Make the Package Available
Distribute the Package
Remove Tutorial Packages from Software Manager
Professional Edition.
This tutorial uses features that are not available in the Standard Edition of Wise Package
Studio.
This tutorial guides you through the process of repackaging an application into Windows
Installer format. You use a sample application named QuickFacts, which is included with
Wise Package Studio, to provide you with a realistic practice scenario. QuickFacts is a
utility that displays facts and bitmaps. It was created to illustrate the repackaging
process.
In this tutorial, you will:
Create a new Wise Package Studio project.
Use SetupCapture to recreate the existing installation in Windows Installer format.
Customize the installation package in Windows Installer Editor.
Verify that the package complies with standards.
Test the repackaged installation.
on page 58
on page 59
on page 63
on page 66
on page 66
on page 68
on page 70
on page 71
on page 71
on page 73
on page 74
on page 56
on page 74
55