Starting The Wise Repository Manager; The Wise Repository Manager Interface - Symantec WISE PACKAGE STUDIO 8.0 - GETTING STARTED GUIDE V1.0 Getting Started Manual

Starting the Wise Repository Manager

The Wise Repository Manager Interface

Wise Package Studio Getting Started Guide
Not available in Standard Edition.
Requirements
To use the Wise Repository Manager:
You must be logged on to a computer that contains a Wise Package Studio server
installation.
You must be logged on as the Wise Package Studio server administrator, that is, the
user account under which Wise Package Studio was installed.
To start the Wise Repository Manager:
After Wise Package Studio is installed, select Start menu > Programs > Symantec >
Wise Package Studio > Wise Repository Manager.
If the Wise Software Repository has not been configured, the Create New Repository
wizard starts.
See Repository Configuration Dialog Boxes
See also:

The Wise Repository Manager Interface

Configuring the Wise Software Repository
Upgrading the Wise Package Studio Databases
Changing Database Settings
Creating Software Manager Databases
Creating a New Repository
Opening a Repository on page 49
Choosing a Revision Control System
Setting the Wise Service Account
Not available in Standard Edition.
When the Wise Repository Manager opens, it displays the current repository.
Managing the Wise Software Repository
on page 50.
on page 43
on page 45
on page 46
on page 47
on page 48
on page 49
on page 52
on page 53
43