Table of Contents
Advertisement
About Lifecycle Controller tasks for Dell servers
DTK tasks for Dell servers (continued)
Table 4-1
Task
Configure Dell Server BIOS -
Simple
Configure Dell Server DRAC -
Advanced
Configure Dell Server DRAC -
Simple
Configure Dell Server RAID -
Advanced
Configure Dell Server RAID with
Rules
Deployment Solution for Dell provides several predefined task types under the
Lifecycle Controller folder. These tasks are mainly used for scripted OS
installations without using PXE.
See
"Performing a scripted OS installation without PXE"
If you create a job using these tasks, ensure that you create a server job and not
a client job.
See
"About deployment tasks and jobs for Dell servers"
Creating tasks and jobs on Dell servers
About Lifecycle Controller tasks for Dell servers
Description
You can set the asset tag, network cards, BMC IP, LCD
text, and enable or disable the power button.
See
"Configure BIOS - Simple task type"
You can view and change all of the DRAC configuration
settings for a server.
See
"Configure DRAC - Advanced task type"
You can set the IP address for the management port
and choose what DRAC commands run after the
configuration is finished.
See
"Configure DRAC - Simple task type"
You can view all of the drives, controllers, and disks
on your server and then configure any of those drives.
See
"Configure RAID - Advanced task type"
You can use a drag-and-drop tool to define multiple
RAID configurations.
See
"Defining rules for RAID configurations"
on page 34.
on page 31.
on page 32.
on page 32.
on page 33.
on page 37.
on page 23.
25
Advertisement
Table of Contents
