Table of Contents
Advertisement
Installing WinRM
Both PXE and Automation folder - This option builds both types of
configurations.
10
Click OK.
11
Ensure that the policy is enabled.
A green On symbol shows in the top right corner.
12
Click Save changes.
WinRM is short for Windows Remote Management, which is freely available from
Microsoft. It is the Microsoft standard for remote management and allows
administrators to remotely execute and manage Windows computers.
You must install WinRM 1.1 or later to run the provisioning tasks. WinRM should
be installed on the same computer that your Notification Server is installed on.
It also needs to be installed on any task servers that are associated with that
Notification Server.
For more information about installing WinRM on site servers, see
https://kb.altiris.com/article.asp?article=52114&p=1.
WinRM sends tasks or commands to your server s DRAC using the WS-MAN
protocol.
See
"Creating provisioning credentials"
For example, WinRM tells the DRAC to reboot to a network ISO and unpack and
attach drivers for an OS scripted installation.
See
"Provisioning a Dell server"
See
"Using Deployment Solution for Dell Servers"
To install WinRM
1
In your browser, go to
http://www.microsoft.com/downloads/details.aspx?FamilyID=845289ca-
16cc-4c73-8934-dd46b5ed1d33&displaylang=en.
2
Download the correct WinRM executable file or your operating system.
3
Run the executable file to install WinRM.
4
Run the following command:
winrm set winrm/config/client/auth @{Basic="True"}
Getting started with Deployment Solution for Dell Servers
on page 18.
on page 19.
on page 11.
15
Installing WinRM
Advertisement
Table of Contents
