Assign Barcode Page - Symantec ALTIRIS BARCODE SOLUTION 7.0 - V1.0 Manual

Assign Barcode page

Pages in the Scanning folder
Table 3-8
Page
Assign Barcode
Quick Scan
Receiving
Search
This page lets you add a barcode to an asset based on serial number. You can use
this page to assign a Barcode when the assets are already in the system. You can
use this page after you move assets to a new department and you need to change
each barcode. This page uses an asset's serial number to locate the asset in
Notification Server and change the barcode. If a Barcode is scanned that is already
in the system, there then a dialog is displayed. The dialog informs you that the
tag is already associated with an asset.
After you scan a barcode tag, the tag is added to the asset.
By default, all of the changes are sent to the batch uploads verification queue and
are not sent directly to the Configuration Management Database. If you check the
Bypass upload verification option on the selected profile then the changes are
sent directly to the Configuration Management Database."
See Quick Scan page"
See Receiving page"
See Search page" on page 34.
Options on the Assign Barcode page
Table 3-9
Option
Profile
Description
Lets you add or update a barcode of asset based on the
serial number.
See

Assign Barcode page"

Lets you quickly scan your assets and update key asset
details.
See Quick Scan page"
Lets you enter new assets into your system.
See Receiving page"
Lets you find and view any resource whose data
correspond with the search criteria.
See Search page"
on page 32.
on page 33.
Description
The profile to use.
Using Barcode Solution's User Interface
Assign Barcode page
on page 31.
on page 32.
on page 33.
on page 34.
31