36
Using Barcode Solution's User Interface
Barcode License Count Exceeded page
Barcode License Count Exceeded page
Install Symantec Barcode Manager page
Synchronization Profile page
See
Quick Scan page"
See
Receiving page"
on page 33.
See
Search page"
on page 34.
This page is displayed instead of the scanning page when your licenses count is
exceeded.
This page is displayed instead of the scanning page when the Barcode Manager
application is not installed.
See
Barcode Solution home page: Quick Links Web-part"
This page lets you set up and configure synchronization profiles. Synchronization
profiles are used when you send assets to a barcode device. When you log into a
profile on the barcode device, you need to enter your Notification Server
credentials. One or more users can use Synchronization profiles. This ability is
useful if you have more than one user with the same job that need access to the
same asset information. You can set up synchronization profiles so that multiple
users can use a single profile or one user can use multiple profiles.
Synchronization profiles can be Opened, Renamed, Deleted, and Exported by
right-clicking the synchronization profile. You cannot delete a default
synchonization profile, but you can modify one.
You can right-click on Synchronization Profiles to create a new profile.
To grant permissions to a synchronization profile, right-click on the
synchronization profile name and select Properties. To give a user access to the
profile, you add that user to the profile. To add a user to a profile, right-click on
the synchronization profile, and select Properties. Then select the Security tab
and assign the appropriate permissions by adding security roles.
Every time that you download assets to the barcode device, additional information
gets downloaded such as associated assets or locations. Due to download limitations
and limited space you may want to only download the assets that each user of the
barcode device requires.
on page 32.
on page 26.