TP-Link TL-WA500G User Manual page 35

MAC Address - Enter MAC address of wireless station that you want to filter. The format of
the MAC Address is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). For example:
00-0A-EB-B0-00-0B.
Description - Give a simple description of the wireless station. For example: Wireless station
A.
Privilege - Select Allow, Deny from the drop-down list. Allow means allowing the station to
access the AP. Deny means denying the station to access the AP.
Status - Select Enabled or Disabled for this entry from the drop-down list. To enable the
above settings, please select Enabled. Otherwise, select Disabled.
Click Save to save this entry.
To modify or delete an existing entry:
1. Click Edit or Delete in the Modify column in the Wireless MAC Address Filtering
Table.
2. Enter the value as desired in the Add or Modify Wireless MAC Address Filtering entry
page, and click Save.
Click Enable All to make all the entries effective.
Click Disable All to make all the entries ineffective.
Click Delete All to delete all the entries.
Click Next to go to the next page.
Click Previous to return to the previous page.
For example:
If you desire that the wireless station A with MAC address 00-0A-EB-00- 07-BE be able to access
the AP, the wireless station B with MAC address 00-0A-EB- 00-07-5F not be able to access the AP,
while all other wireless stations cannot access the AP, you should configure the Wireless MAC
Address Filtering list following these steps:
1. Click Enable to enable this function.
2. Select the radio button: Deny the stations not specified by any enabled entries in the
list to access for Filtering Rules.
3. Delete all or disable all entries if there are any entries existing already.
4. Click Add New... and enter the MAC address 00-0A-EB-00-07-BE in the MAC Address
field, enter wireless station A in the Description field, select Allow in the Privilege
drop-down list and select Enabled in the Status pull-down list. Click Save and Back.
5. Repeat step
00-0A-EB-00-07-BE.
After finishing the above steps, you can see the filtering rules you configured are similar to the
following list as in figure
TL-WA500G
4 using the MAC
28
54M Wireless Access Point User Guide
address 00-0A-EB-00-07-5F instead of