Information Window; Ptz Camera Control; Preset/ Go; Zoom - TP-Link TL-SC3130G User Manual

2.2 Information Window:

Display date, time, free HD space, CPU temperature, fan speed, and customized text.
To customize Information about window's setting, go to Config > General Setting >
General

2.3 PTZ Camera Control:

Control the movement of PTZ cameras. With cameras that support PTZ control, you
can move, zoom, patrol, adjust the focus, and set preset points of the cameras.
2.3.1.

Preset/ Go:

Adjust the camera view until you are satisfied. Click on the Set icon and set up the
view as the preset point 01. Adjust the camera view again and set up the preset point
02. Repeat the process until finish setting up all preset points. You can enter any
names you like to instead of the preset point 01, preset point 02, preset point 03.
Click on the Go icon and view the result of your setting.
2.3.2.

Zoom:

Click on the + and – signs to zoom in and zoom out the view.
2.3.3.

Focus:

You can select to have the camera focused near or far. To focus near means objects
that are closer will be clearer than the objects that are further away. On contrast, to
focus far means objects that are further will be clearer than the objects that are
closer.
Click on the Focus icon and select auto focus if you want the system to decide the
focus point for you.
2.3.4.

Patrol:

Go to Patrol > Set Patrol to obtain the Patrol Setup dialog. From the left window,
select the cameras that you would like to have in the patrol group. Align the cameras
in order in the right window and adjust the time. Rename the group name if you want.
After completing the setup, check the Active option, and then click OK.
You can setup up to four groups of auto patrol. To start or stop, click on the Patrol
icon in the Main Console, and select Start Patrol or Stop Patrol.
13