TP-Link TL-SC3130G User Manual page 11

Set Schedule
Step 1: Go to Start > All programs > IP Surveillance > Main
Console.
Step 2: Type in user name and password and log on to the system.
Step 3: In the Main Console, go to
Schedule.
Step 4: By default, when inserting a
camera to the system, the
recording schedule is
automatically set to be 24 hours
a day, always record.
Step 5: Click Configure on the selected
camera schedule or double click
on any schedule bar to modify
the recording mode.
Step 6: When satisfied with the schedule setting, click OK to update the recording
schedule.
Step 7: Click OK again to go back to the Main Console.
Set Smart Guard
Step 1: Go to Start > All Programs > IP Surveillance >
Main Console.
Step 2: Type in user name and password and log on to
the system.
Step 3: In the Main Console, go to Guard.
Step 4: Select a camera and then click on "Insert
Event."
Step 5: Select General Motion as the event type, click
OK.
Step 6: In the Alarm Event Configuration panel, set the detection zone as all, and
then click OK to exit the panel.
Step 7: Click OK to go back to the Main Console.
Step 4
7
Step 3
Step 3