System Setup Program Update; Memory Screen - Dell PowerEdge 1950 Information Update

System Setup Program Update

Memory Screen

Table 1-3 lists the descriptions for the information fields that appear on
the Memory Information screen.
Table 1-3. Memory Information Screen Options
Option
System Memory Size
System Memory Type
System Memory Speed
Video Memory
System Memory Testing
Redundant Memory
(Disabled default)
Node Interleaving
(Disabled default)
Low Power Mode
(Disabled default)
Description
Displays the amount of system memory.
Displays the type of system memory.
Displays the system memory speed.
Displays the amount of video memory.
Specifies whether system memory tests are run at system
boot. Options are Enabled and Disabled.
Enables or disables the redundant memory feature.
When set to Spare Mode, the first rank of memory on
each DIMM is reserved for memory sparing. Redundant
memory feature is disabled if the Node Interleaving field
is enabled.
If this field is set to Enabled, memory interleaving is
supported if a symmetric memory configuration is
installed. If this field is set to Disabled, the system can
support Non-Uniform Memory architecture (NUMA)
(asymmetric) memory configurations.
NOTE:
The Node Interleaving field must be set to Disabled
when using the redundant memory feature.
Enables or disables the low power mode of the memory.
When set to Disabled, the memory runs at full speed.
When set to Enabled, the memory runs at a reduced
speed to conserve energy.
Information Update
21