HP Integrity BL860c Release Note page 10

SANsurfer Command Line Utility (SCLI) for Windows
Windows Usage and screenshot:
===================================================================
Windows Command Line
===================================================================
Z:\>scli -dm -h
SANsurfer FC HBA CLI v1.7.1
Build 13
Copyright (C) 2003-2008 QLogic Corp.
All rights reserved.
Command Line QLogic FC Host Bus Adapters
Build Type: Release
Build Date: 12/14/2007 10:15:58 AM
Tranceiver Diagnostics (SFF/SFP DMI)
USAGE:
Runs a transceiver (SFF/SFP) diagnostics on an HBA port and
displays the result in general view.
scli -dm ( <hba instance> | <hba wwpn> | <all> ) gen | general
Runs a transceiver (SFF/SFP) diagnostics on an HBA port and
displays the result in detail view.
scli -dm ( <hba instance> | <hba wwpn> | <all> ) det | details
Options:
<hba instance> The HBA instance number of an HBA port.
<hba wwpn> The World Wide Port Name of an HBA port.
<all> All HBAs.
Note: This feature is supported only on 8Gb or latest HBAs.
EXAMPLE OUTPUT:
Z:\>scli -dm 0 gen
__________________________________________________________________________
HBA Instance 0: QLA2462 Port 1 WWPN 21-00-00-E0-8B-1F-9D-F0 PortID 01-09-00
__________________________________________________________________________
Media Information
__________________________________________________________________________
Vendor: FINISAR CORP.
Type: 400-M6-SN-I
Part Number: FTLF8524E2KNL
Speed: 100 MBytes/Sec, 200 MBytes/Sec, 400 MBytes/Sec
Revision: A Serial Number: U730154
__________________________________________________________________________
Temperature
(C)
Value 42.94
Status Normal
High Alarm 95.00
High Warning 90.00
Low Warning -20.00
Low Alarm -25.00
10
Voltage Tx Bias
(V) (mA)
3.25 8.01
Normal Normal
3.90 17.00
3.70 14.00
2.90 2.00
2.70 1.00
Tx Power Rx Power
(mW) (mW)
0.365 0.282
Normal Normal
0.631 1.259
0.631 0.794
0.079 0.016
0.067 0.010