Removing The Doors From The 42-U Rack; Figure 1-11. Opening The 42-U Rack Door - Dell PowerApp 110 Installation Manual

1-14 Rack Installation Guide

Removing the Doors From the 42-U Rack

CAUTION: To prevent personal injury due to the size and weight of the
doors, never attempt to remove the doors by yourself.
CAUTION: Store the two doors where they will not injure someone if the
doors accidently fall over.
This procedure provides instructions for removing doors from earlier 42-U Dell racks.
If you have a newer Dell PowerEdge™ 4210 rack, refer to the procedures contained in
the Dell PowerEdge 4210 Rack Installation Guide.
1. Open the latch on the front door (see Figure 1-11).
Slide the button cover up as far as it will go, press the push button, rotate the
handle clockwise until the latch releases, and then pull the door open.

Figure 1-11. Opening the 42-U Rack Door

push-button
cover
push button
handle