Calibration
Adjusts the white balance to the correct value so that all the colors are scanned
correctly. Calibration takes approximately 1 minute. If the color balance of a
scanned image is off-balance, select this option to calibrate the scanner input.
Reset Default Settings
Returns the preference settings and all other settings to the factory default
settings. The tables list the major default settings.
Scan Mode
Magnification
Unit
Basic Resolution
Control Panel Position
Image
Unsharp Mask
Descreen
Color
100%
Pixels
72 dpi
Center
Recommended
Off
Off
27
S T E P
1