Whea Configuration; Apm Setting - Asus Z9PH-D16 FDR User Manual

4.4.11

WHEA Configuration

Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced
WHEA Support
WHEA Support [Enabled]
Allows you to enable or disable the Windows Hardware Error Architecture support.
Configuration options: [Disabled] [Enabled]
4.4.12

APM setting

Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced
Restrore AC Power Loss
Power On By PCIE
Power On By Ring
Power On By RTC
Restore AC Power Loss [Last State]
When set to [Power Off], the system goes into off state after an AC power loss.
When set to [Power On], the system will reboot after an AC power loss. When set
to [Last State], the system goes into either off or on state, whatever the system
state was before the AC power loss.
Configuration options: [Power Off] [Power On] [Last State]
Power On By PCIE [Disabled]
[Disabled] Disables the PCIE devices to generate a wake event.
[Enabled] Enables the PCIE devices to generate a wake event.
Resume On By Ring [Disabled]
When set to [Enabled], the system will generate a wake event when the external
modem receives a call while the computer is in Soft-off mode.
Configuration options: [Disabled] [Enabled]
Power On By RTC [Disabled]
[Disabled] Disables RTC to generate a wake event.
When set to [Eanbled], the items RTC Alarm Date (Days) and
[Enabled]
Hour/Minute/Second will become user-configurable with set
values.
ASUS Z9PH-D16 Series
[Enabled]
[Last State]
[Disabled]
[Disabled]
[Disabled]
Enable or disable Windows
Hardware Error Architecture.
Specify what state to go to
when power is re-applied after
a power failure (G3 state).
4-29