Whea Configuration; Apm Setting - Asus Z9PR-D12 SERIES User Manual

4.4.10

WHEA Configuration

Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced
WHEA Support
WHEA Support [Enabled]
Allows you to enable or disable the Windows Hardware Error Architecture support.
Configuration options: [Disabled] [Enabled]
4.4.11

APM setting

Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Advanced
Restore AC Power Loss
Power On By PCIE
Power On By Ring
Power On By RTC
Restore AC Power Loss [Last State]
When set to [Power Off], the system goes into off state after an AC power loss. When set to
[Power On], the system will reboot after an AC power loss. When set to [Last State], the system
goes into either off or on state, whatever the system state was before the AC power loss.
Configuration options: [Power Off] [Power On] [Last State]
Power On By PCIE [Disabled]
[Disabled]
[Enabled]
Power On By Ring [Disabled]
[Disabled]
[Enabled]
Power On By RTC [Disabled]
[Disabled]
[Enabled]
4-30
[Enabled]
[Last State]
[Disabled]
[Disabled]
[Disabled]
Disables the PCIE devices from generating a wake event.
Enables the PCIE devices to generate a wake event.
Disables the Ring devices from generating a wake event.
Enables the Ring devices to generate a wake event.
Disables RTC from generating a wake event.
When set to [Enabled], the items RTC Alarm Date (Days) and Hour/
Minute/Second will become user-configurable with set values.
Enable or disable Windows
Hardware Error Architecture.
Specify what state to go to
when power is re-applied after
a power failure (G3 state).
Chapter 4: BIOS setup