Monitor Menu - Asus Z9PH-D16 FDR User Manual

4.8

Monitor menu

The Monitor menu displays the system temperature/power status, and allows you
to change the fan settings.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
Main Advanced
TR Function
CPU1 Temperature
CPU2 Temperature
MB Temperature
TR1 Temperature
TR2 Temperature
FRNT FAN1 Speed
FRNT FAN2 Speed
FRNT FAN3 Speed
FRNT FAN4 Speed
+VTT_CPU
VCORE1
VCORE2
+VDDQ_AB_CPU1
+VDDQ_CD_CPU1
+VDDQ_EF_CPU2
+VDDQ_GH_CPU2
+5VSB
+5V
+12V
+3.3V
VBAT
+3.3VSB
FAN Speed Control
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
TR Function [Disabled]
[Disabled] Voltage monitor.
[Enabled] Temperature monitor.
The TR1/TR2 Temperature items appears only when you set TR Function to
[Enabled] and restart the system.
CPU 1/2; MB; TR1/TR2 Temperature [xxxºC/xxxºF]
The onboard hardware monitor automatically detects and displays the CPU and
motherboard component temperatures. Select Ignore if you do not wish to display
the detected temperatures.
FRNT FAN1–4 Speed; [xxxx RPM] or [Ignore] / [N/A]
The onboard hardware monitor automatically detects and displays the speed of
CPU fans, front fans, and rear fan in rotations per minute (RPM). If the fan is not
connected to the motherboard, the field shows N/A.
+VTT_CPU Voltage, VCORE1/2 Voltage, +VDDQ_AB_CPU1
Voltage, +VDDQ_CD_CPU1 Voltage, +VDDQ_EF_CPU2 Voltage,
+VDDQ_GH_CPU2 Voltage, +5VSB Voltage, +5V Voltage , +12V
Voltage, +3.3V Voltage, VBAT Voltage, +3.3VSB Voltage
The onboard hardware monitor automatically detects the voltage output through
the onboard voltage regulators.
ASUS Z9PH-D16 Series
Server Mgmt Event Logs
[Disabled]
60.0ºC/140.0ºF
N/A
68.0ºC/154.4ºF
N/A
N/A
7031 RPM
3948 RPM
4005 RPM
6818 RPM
+1.026 V
+1.010 V
N/A
+1.510 V
+1.526 V
N/A
N/A
+4.921 V
+5.036 V
+11.592 V
+3.276 V
+3.168 V
+3.234 V
[Generic Node]
Boot Monitor Security
Disable: Voltage monitor.
Enabled: Temperature monitor.
→←: Select Screen
Select Item
↑↓:
Enter: Select Item
+/-: Change Opt.
F1: General Help
F2: Previous Values
F5: Optimized Defaults
F10: Save & Exit
ESC: Exit
Tool Exit
4-43