Vflash Media (Optional); Installing A Vflash Media Card; Removing A Vflash Media Card; Processor - Dell DX6012S Hardware Owner's Manual

VFlash Media (Optional)

The VFlash media card is a Secure Digital (SD) card that plugs into the
iDRAC6 Enterprise card at the back corner of the system.

Installing a VFlash Media Card

1 Locate the VFlash media slot at the back of the system.
2 With the label side facing up, insert the contact-pin end of the SD card
into the card slot on the module.
NOTE:
3 Press inward on the card to lock it into the slot.

Removing a VFlash Media Card

To remove the VFlash media, push inward on the card to release it, and pull
the card from the card slot.

Processor

Removing a Processor

CAUTION:
You should only perform troubleshooting and simple repairs as authorized in
your product documentation, or as directed by the online or telephone service
and support team. Damage due to servicing that is not authorized by Dell is not
covered by your warranty. Read and follow the safety instructions that came
with the product.
1 Prior to upgrading your system, download the latest system BIOS version
on support.dell.com.
2 Turn off the system, including any attached peripherals, and disconnect
the system from the electrical outlet.
3 Open the system. See "Opening the System" on page 70.
4 Remove the cooling shroud. See "Removing the Cooling Shroud" on
page 72.
WARNING:
system has been powered down. Allow the heat sink and processor to cool before
handling them.
104
Installing System Components
The slot is keyed to ensure correct insertion of the card.
Many repairs may only be done by a certified service technician.
The heat sink and processor are hot to touch for some time after the