Dell DX6012S Hardware Owner's Manual page 13

Item Indicator, Button,
or Connector
3 NMI button
4 System identification
button
5 Hard drives
6 System identification
panel
7 USB connector
8 Video connector
Icon Description
Used to troubleshoot software and
device driver errors when using certain
operating systems. This button can be
pressed using the end of a paper clip.
Use this button only if directed to do so
by qualified support personnel or by the
operating system's documentation.
The identification buttons on the front
and back panels can be used to locate
a particular system within a rack.
When one of these buttons is pushed,
the blue system status indicator on the
back blink until one of the buttons is
pushed again.
Up to twelve 3.5-inch hot-swappable
SAS or SATA drives.
A slide-out panel for system information
including the Express Service tag,
embedded NIC MAC address, and
iDRAC6 Enterprise card MAC address.
Connects USB devices to the system.
The ports are USB 2.0-compliant.
Connects a monitor to the system.
About Your System
13