Advertisement
Panasonic BL-C10 Camera Installation & Configuration Guide
4. In the window that appears choose Automatic Setup (Local Access Only).
5. Wait until the automatic setup dialog window appears. Specify the correct IP address
and subnet mask and click OK.
6. Wait until the web page appears. Specify User Name and Password and click the Save
button.
7. Next, the logon window appears. Log into the camera under the credentials you have
just specified. As a result you'll get to the camera web page.
8. A window will appear, that informs you about setup completion. Click Next to enter
the advanced setup.
9. In the Camera Setup Choice screen choose Manual Setup by clicking corresponding
the button.
Manual Setup is necessary to assign a static IP address to the camera. Quadrox
strongly recommends such a configuration.
10. In the Manual Setup screen check settings and click the Save button.
Version 3.0 Series
Automatic Setup Completion Screen
6
Advertisement
