Advertisement
Panasonic BL-C10 Camera Installation & Configuration Guide
3 Advanced configuration
You are able to configure the camera using the camera's setup page while logged onto
WebCCTV NVR. Use the Go to link from WebCCTV NVR System menu or simply specify
the camera IP address in the Internet Explorer Address field.
Quadrox recommends implementing the following settings:
When your camera is configured as described above you are able to increase your
network security. Follow the steps below:
1. Go to the camera Setup page. Choose Network menu item.
2. Click on the link Static.
3. Disable the network configuration from the setup program by deselecting the
Enable checkbox.
This locks your network configuration, making sure that nobody can use Camera Setup
to change the camera IP address.
Version 3.0 Series
Cameras Setup Screen
8
Advertisement
Need help?
Do you have a question about the BL-C10E and is the answer not in the manual?