Connecting To A Pictbridge Compliant Printer - Vivitar VIVICAM 5386 Manual

Connecting to a PictBridge Compliant Printer

Even if you do not have a computer, you can connect the camera directly to a printer that supports
PictBridge to perform image selection and printing using the camera monitor screen and controls.
Connecting the camera to the printer
1. Rotate the mode dial to
the power (ON/OFF) button.
2. Press to select the [CUSTOM] menu, then use
[USB].
3. Use or to select [PRINT], then press the
4. Connect your camera and the printer via a supplied USB cable.
The screen turns off automatically and the setting screen wil
appear on the monitor after seconds of time.
Printing images
When the camera is properly connected to a PictBridge compliant printer, the [PRINT MODE SELECT]
screen is displayed on the monitor. Use
In [PRINT] Mode: Lets you print the specified image with PictBridge.
Step Figure
PRINT MODE SELECT
PRINT
1
SELECT:
EN-46
and turn your camera on by pressing
or
Procedure
Use or to select the [PRINT] mode, then press the
* The [PRINT PAPER] screen is displayed.
SET:
OK
to select
button.
to select the print mode.
USB
PC
PRINT
2 / 2
SET:
OK
button.