Defining Motion Detection Exclude Areas - Axis CAMERA RECORDER 1.1 User Manual

24

Defining Motion Detection Exclude Areas

Areas that should not be included in the motion detection area can be
excluded from the image by marking the relevant areas in the Exclude
Regions settings.
Clicking in the image with the left mouse button will exclude squares from
the motion detection, as shown above, and clicking with the right button
will include them. It is also possible to Set All - include all squares in the
image in the motion detection, or to Clear All - exclude all squares from
the motion detection.
Also available is the Auto function. This will automatically detect and
exclude "noisy" areas from motion detection. Note that motion detection
must be reasonably well calibrated before this will work properly.
Show grid - Shows or hides the grid lines.
The Administrator Application
Figure 6 - The Exclude Regions dialog.
Filled squares
indicate that
motion will
not be
detected here.