Changing Device Settings - Axis CAMERA RECORDER 1.1 User Manual

The Administrator Application
15
MAC address (S/N) - This is the hardware address of the camera/video
server, e.g. 00408c291ba2 and it corresponds to the serial number found
on the product's serial number label. This is the MAC address used to
initially install the device.
The name for the camera/video server should reflect its usage or
Name -
location. Note that two devices cannot use the same name.
Camera Setup - Used to set up/modify camera names and PTZ devices for
the device. For example, the AXIS 2400 video server uses the default
camera names Camera 1, Camera 2, etc., which can be changed here. PTZ
devices (PTZ cameras or fixed cameras on PTZ heads) can be enabled, and
the COM port and PTZ driver can be selected. For more detailed
information see Configuring Video Servers below.
After a device has been successfully added, a new device icon will appear
in the Device Manager window.

Changing Device Settings

The settings described above for adding a new device can all be modified
simply by selecting the device and clicking Edit Device...