Swisher PowerBlade PBA-6510 Assembly Instructions

For arctic cat models 250, 300, & 400 models 02 and older 454 models 98 & older 500 models 02 & older may fit additional models see master list

PBA-6510

Arctic Cat Models

250, 300, & 400 Models 02 and older

454 Models 98 & older

500 Models 02 & Older

May fit additional models see Master List

Caution: Do not exceed 5 MPH with the blade or it's brackets installed

Remove the mount plate(s) for trail riding where extra ground clearance is needed

12987 REV 06-307

1602 Corporate drive

P.O. Box 67

Warrensburg, MO 64093

1-877-627-5860

Front

Partial Frame View

Table of Contents

Need help?

Do you have a question about the PowerBlade PBA-6510 and is the answer not in the manual?

Page 1 PBA-6510 Arctic Cat Models 250, 300, & 400 Models 02 and older 454 Models 98 & older 500 Models 02 & Older May fit additional models see Master List Front Partial Frame View Caution: Do not exceed 5 MPH with the blade or it’s brackets installed...
Page 2 Assembly Instructions Note. Right and Left direction are from the operator position. The lower skid plate, If so equipped, may need to be removed. Please retain plate and hardware to be reinstalled if the plate is removed.. Arctic Cat 250 Assembly Instructions Remove 4 foot peg bolts.