Table of Contents
Advertisement
TRENDnet User's Guide
Network >> IP Filter
The IP Filter setting allows the administrator of the camera to limit the users within a
certain range of IP addresses to access the camera.
To disable this feature, select the Disable option; otherwise, select the Accept option
to assign the range of IP addresses that are allowed to access the camera, or select
the Deny option to assign the range of IP addresses that are blocked to access the
camera.
Disable: Select this option to disable the IP Filter function of the camera.
Accept
IPv4: Assign a range of IP addresses that are allowed to access the camera by
entering the Start IP address and End IP address options. When you are
finished, click Add to save the range setting. You can repeat the action to
assign multiple ranges for the camera.
For example, when you enter 192.168.0.50 in Start IP Address and
192.168.0.80 in End IP Address, the user whose IP address located within
192.168.0.50 ~ 192.168.0.80 will be allowed to access the camera.
IPv6: Enter the IP Address that is allowed to access the camera.
Deny
IPv4: Assign a range of IP addresses that are blocked to access the camera by
entering the Start IP address and End IP address options. When you are
© Copyright 2012 TRENDnet. All Rights Reserved.
finished, click Add to save the range setting. You can repeat the action to
assign multiple ranges for the camera.
For example, when you enter 192.168.0.50 in Start IP Address and
192.168.0.80 in End IP Address, the user whose IP address located within
192.168.0.50 ~ 192.168.0.80 will not be allowed to access the camera.
IPv6: Enter the IP Address that is not allowed to access the camera.
Video & Audio
The Video & Audio menu contains four sub-menus that provide the video and audio
settings for the camera.
TV-IP262PI
19
Advertisement
Table of Contents
