Login Options; Administrator Settings; Auto Logout - Canon 2263B002 - imageFORMULA ScanFront 220 Instructions Manual

Auto Logout

Set the scanner to automatically log users out after a
specified period of inactivity.
IMPORTANT
When Display Off activates and the touch panel display turns
off, touch the panel to restore the display.
❏ Login Options
You can set the type of user login screen that appears.
Hint
The login setting can also be changed under [Administrator
setting] on the scanner.
List type login
Log in by selecting a user from the list.
Key in type login
Log in by entering a user name and password.
IMPORTANT
When using an authentication server, the login type is set to
[Key in type login], and users log in by selecting [Device
Authentication] and [Server Authentication].
"Authentication Server" on p. 4-28.)
❏ Administrator Settings
You can set the password and e-mail address of the
Administrator.
Administrator Password
Change the Administrator password.
Administrator Address
Register the Administrator e-mail address.
• The e-mail address of the Administrator is used as the
originating address when a user without a registered e-mail
address sends an e-mail message.
• When a sent e-mail message results in an error due to, for
example, an incorrect e-mail address, an error notification is
delivered from the mail server to the e-mail address of the
administrator.
(See
4-26
Chapter 4 Web Menu (Administrator Mode)
IMPORTANT