DirecTV SAT GO Owner's Manual page 15

Before Using Your DIRECTV
Difference of key operation in TV mode and DIRECTV mode
- The following buttons are operated differently in TV mode and DIRECTV mode.
MENU
Inserting the Batteries
You must insert or replace the batteries in the remote control when you:
+
+
1. Remove cover from the battery compartment by sliding it downward.
2. Insert 2 AAA batteries (supplied), matching the positive (+) and negative (–) at each end.
3. Slide the cover back on to complete installation.
CAUTIONS:
-
-
-
-
-
14
Key
Displays the DIRECTV menu of settings
MENU
and services
Displays info for a highlighted or
INFO
fullscreen program
In Guide, jumps 12 hours back; other
RED
functions vary — look for onscreen hints
In Guide, jumps 12 hours forward; other
GREEN
functions vary — look for onscreen hints
In fullscreen TV, cycles through alternate
YELLOW audio tracks; other functions vary — look
for onscreen hints
In live TV, displays the Mini Guide; other
BLUE
functions vary — look for onscreen hints
Tune to a channel directly; also input
NUMBER KEYS numbers and letters when needed in
onscreen menus
Purchase the DIRECTV Sat-Go.
Find that the remote control is no longer operating correctly.
Insert two 1.5V AAA-type batteries. Don't mix used batteries with new batteries.
Remove batteries when you don't use the remote control for long periods. Liquid
leakage from old batteries may cause operation failure.
Make sure there are no objects between the remote control and its sensor.
Don't place the remote control near a heater or damp place. Strong impact on
remote controller may cause operation failure.
The signal from the remote control may be subjected to interference from sunlight
or other strong light.
In DIRECTV Mode
®
Sat-Go
In TV Mode
Displays the TV menu or
returns to the previous menu
Displays the current input
source
Changes the closed caption
(For future use)
(For future use)
Changes the screen
resolution
Use to input password