Kenmore 7531 - 22.0 cu. Ft. Top Freezer Refrigerator Use & Care Manual page 14

• Using a 10mm or 13/32 inch socket wrench
remove Middle Hinge Bracket and set aside.
Fig. 31
• Using a 13/32" 10mm socket wrench with
2"extension, loosen the 3 bolts and remove
bottom hinge from right side.
Fig. 32
• Remove the bolt on bottom of refrigerator from
the left side and insert it on the right side.
You will need this hole for the Bottom Hinge.
Fig. 33 ............
¼
Fig. 34
• Move the Bottom Hinge to the left side keeping
the same orientation and attach 3 bolts.
Fig. 35
14
• Remove screw from water tube clip.
water tube cli
• Reattach to the left side as shown below.
water tube ctlp
c "-'-'_-_ _--_ water [uiee
Fig. 37 ........ _ ......... i i_i
• IMPORTANT: Insert the wire harness into the base
as shown below.
Fig. 38
• Turn refrigerator door upside down on a non-scratch
surface and remove cap cover located on the left
Side using a flat-head screwdriver.
Then attach the cap cover on the opposite side.
Cap cover is force fitted and holds the electrical
harness.
Fig. 39
Fig. 40