Table of Contents
Advertisement
ENSURING
PROPER
AIR CIRCULATION
SETTING
THE CONTROLS
In order to ensure proper temperatures,
air must flow
between the refrigerator and freezer sections. As shown
in the illustration below, air enters at top of the freezer and
circulates down. From bottom of the freezer, air is forced up
to top of refrigerator. Air enters refrigerator through top
vent, then circulates and exists at bottom, where it returns
to freezer.
MULTI-FLOW
Multi-Flow means powerful and effective cooling
operation. This is especially noticeable when new food
is placed in the refrigerator compartment.
If water or foreign substances enter the cool air vent
while cleaning, efficiency will be lowered. In addition, if
gasket is damaged, efficiency may be lowered because
of escaping cool air.
IMPORTANT: Wipe out moisture before using the display
button as operation of the button is based on touch
sensing method and becomes slow or other buttons may
operate if moisture is stuck to the surface of the button.
Your refrigerator has a control pad on the dispenser that
lets you regulate the temperature in the freezer and
refrigerator compartments.
Initially set the REFRIGERATOR CONTROL at 37 °F
(3 °C) and the FREEZER CONTROL at 0 °F (-18 °C).
Leave it at this setting for 24 hours (one day) to
stabilize. Then adjust the compartment temperature as
desired.
Do not block any of cool air vents with food packages.
If the vents are blocked, airflow will be interrupted and
temperature and moisture problems may occur.
IMPORTANT: Because air circulates between both
sections, any odors formed in one section will transfer to
the other. You must thoroughly clean both sections to
eliminate odors. To prevent odor transfer and drying out of
food, wrap or cover foods tightly. (See the Food Storage
Guide section for details.)
DOOR ALARM
With this feature you'll listen a alarm when the freezer or
refrigerator door is not closed within 1 minute after it is
opened. These tones repeat every 30 seconds.
The alarm is cancelled when the freezer or the
refrigerator is closed correctly.
Alarm
Press the ALARM button _
once to activate and
deactivate the door alarm function.
Refrigerator Temp Control:
33 °F to 46 °F (0 °C to 8 °C)
The lower the number setting, the colder the refrigerator
compartment will become.
Freezer Temp Control:
-6°F to 8 °F (-21 °C to-13 °C)
When the setting is at a lower number, the freezer
compartment
becomes colder. The refrigerator
compartment
becomes warmer because less cold air
flows into the refrigerator.
NOTE: If you want to change °F to °C or the reverse,
press and hold FREEZER key and REFRIGERATOR
key
simultaneously
for 5 seconds or more.
Ultra Ice : Press the Ultra Ice button and the LED will
turn on. This function will remain activated for 24 hours
and increase the cooling speed of the freezer and the
amount of ice produced.
Dispenser Lock : Press and hold the LOCK button for 3
seconds to lock the dispenser and all of the other control
panel functions.
When it is locked, the dispenser will not operate. To
unlock, press and hold the LOCK button for 3 seconds.
Filter Reset : When the FILTER RESETicon turns on,
you have to change the water filter. Press the FILTER
RESETbutton for 3 seconds to turn the icon off. You
need to change the water filter approximately every 6
months.
[] WARNING: If a door is open, the dispenser does not
work.
16
Advertisement
Table of Contents
