ScanSoft TEXTBRIDGE PRO-MILLENIUM Manual page 36

S S
CANNER ETUP
2–10
2. Click Install TextBridge Pro Millennium.
Follow the onscreen prompts and instructions to install
TextBridge Pro Millennium.
3. Specify when you want to restart your PC, then click
Finish.
Restarting is necessary to complete the TextBridge setup. We
recommend that you restart immediately. However, if you want to
perform other activities before restarting, click No.
Congratulations! TextBridge setup is now complete, and your new
software is installed on your PC.
Updates to your TextBridge software may be available on the
Note
ScanSoft web site. Refer to "Updating your TextBridge Software"
later in this chapter for more information.
The first time you attempt to scan after installing TextBridge,
TextBridge automatically runs the Scanner Setup wizard. You
can also run the Scanner Setup wizard yourself from the
TextBridge program group in the Windows Start menu. Check
that the proper driver for your scanner is selected.
For scanners not listed as supported by TextBridge (on the
ScanSoft web site), be sure to use the Scanner Setup wizard
scanner test. The scanner test assures operation of your scanner
with TextBridge and determines optimal settings. You can also
run the scanner test if you are experiencing problems with your
scanner.
TextBridge Pro Millennium User's Guide