ScanSoft TEXTBRIDGE PRO-MILLENIUM Manual page 29

Depending upon the design of your TWAIN driver, you may not
be able to scan in color with TextBridge. If you have a triple-pass
scanner, use it in single pass, black and white mode only.
If you have a Visioneer sheetfed scanner, use the Visioneer
Paperport software and drag and drop an image onto TextBridge
or your word processor.
An ISIS driver will be installed by TextBridge to support the
Hewlett-Packard Scanjet 5100C model scanners. Other ISIS
drivers previously installed on your system will be accessible
through TextBridge and may work, however only the HP Scanjet
5100C ISIS driver is supported by ScanSoft.
The full list of scanners supported by TextBridge is always
growing. Check the TextBridge Web site at www.scansoft.com
to view the most up-to-date list of supported scanners.
Install your scanner before you install TextBridge.
Note
Scanners require a TWAIN source driver or an ISIS driver, which
are provided by the scanner or interface card manufacturer.
Consult the scanner documentation for details about installing
your scanner, interface card, and driver.
After installing your scanner, test that the scanner is functioning.
Refer to the scanner manufacturer's documentation to answer
any questions about the scanner.
Your scanner must be working independently of TextBridge prior
Note
to connecting it to TextBridge.
In general, we recommend that you turn on your scanner before
you turn on your PC.
Next, install and test your scanner.
Installing TextBridge
2–3