Table of Contents
Advertisement
3. Click the picture that you like best, or if you want to further adjust
the exposure, slide the lever on the Exposure bar to the right or left,
and then click a picture.
As you slide the lever, the exposure in all samples changes. If you
want to return the pictures to their original state, click the Return To
Original picture.
After you click a picture, Step 2, Color, appears with samples of your
picture.
4. Click the picture that you like best, or if you want to further adjust
the color, slide the lever on the Color adjustment bar to the right or
left, and then click a picture. As you slide the lever, the color in all
samples changes.
After you click a picture, Step 3, Tint, appears with samples of your
picture.
5. Click the picture that you like best, or if you want to further adjust
the tint, slide the lever on the Tint adjustment bar to the right or left,
and then click a picture. As you slide the lever, the tint in all samples
changes.
After you complete the last step, a progress dialog box appears as your
picture is adjusted.
NOTE: You do not need to complete all steps to adjust a picture.
You can click the OK button at any time. The changes you make in a
previous step will be saved. For example, to adjust only the exposure,
select a picture in Step 1, then click OK. To adjust only the color, click
the center picture in Step 1 (retaining the original picture exposure),
adjust the color in Step 2, and click OK.
Adjusting and Enhancing Images
75
Advertisement
Table of Contents
