Using Scandirect Function Keys - Visioneer PAPERPORT 5.0 SOFTWARE FOR MACINTOSH User Manual

2. From the Target Application pop-up menu, choose an application.
3. Click OK.
4. Insert the item into the scanner. The scanner scans the item.
U
The ScanDirect function keys are programmed keys that you can use to
send a scanned item directly to an application. When you press a function
key, the PaperPort software uses the scan settings associated with a
function key's target application. The keys are:
• F5 PaperPort Desktop. Sends the scanned item to the PaperPort
• F6 Page Viewer. Sends the scanned item to the Page Viewer.
• F7 Photocopy. Prints a copy of the scanned item on your printer.
• F8 Fax. Sends the scanned item to your electronic fax software.
• F9 Word Processor. Converts the scanned item using the PaperPort
• F10 Image Editor. Sends the scanned item to the image editing
• F11 Settings. Displays the Scan Settings dialog box.
• F12 Show or Hide. Shows or hides the Link Bar on the Macintosh
If you press function keys F5–F10, the application associated with the key
becomes the selected ScanDirect target application in the ScanDirect To
menu and on the Link Bar.
2: Scanning Items
12
Scan settings and a scan mode appropriate for the application appear.
In the previous figure, the Page Viewer settings appear.
The PaperPort software converts the image into a compatible format
for the target application and opens it in the target application.
S D F
SING CAN IRECT UNCTION
Desktop.
OCR software, and then opens the item in your word processor.
application supplied with the PaperPort software.
desktop.
K
EYS