Selecting Scan Settings - Visioneer PAPERPORT 5.0 SOFTWARE FOR MACINTOSH User Manual

4. To select a word processor for the Word Processor function key, click
5. From the Target pop-up menu, choose an application and click OK.
S
Each target application has a set of scan settings that defines the way the
scanner works and how the PaperPort software handles the scanned
image. The PaperPort software chooses default settings that are often the
most appropriate for a target application. However, if you want to change
the settings, use the Scan Settings dialog box. This section tells you how
to select scan settings for a specific target application. For information
about selecting scan modes (also defined in the Scan Settings dialog box),
see "Working with Scan Modes" later in this chapter.
2: Scanning Items
14
the Text button. To select an image editor for the Image Editor
function key, click the Image Editor button. A dialog box appears
asking you to select the target application. The following figure shows
the dialog box that appears when you choose a word processor.
The applications available in the pop-up menu depend on the
applications installed on your Macintosh computer.
The selected application name and icon appear in the Preferences
dialog box.
S S
ELECTING CAN ETTINGS
TIP: There are three ways to display the Scan Settings dialog box:
(1) Press the button on the left side of the scanner to display the
settings; (2) Choose Scan Settings from the Visioneer menu; (3) Press
the F11 function key.
Target pop-up menu.