Table Zones - ScanSoft OMNIPAGE PRO X FOR MACINTOSH Manual

2. Select the zone you want to delete by clicking it. Handles appear
on the selected zone.
• Shift-click to select additional zones.
• Double-click the Draw/Select Zones tool or choose Select All
in the Edit menu to select all zones on the current page.
3. Press the Delete key or choose Clear in the Edit menu.
The selected zones disappear, but the page image itself remains. If
you do manual zoning and select Use Only Current Zones, any part
of an image not enclosed by a zone is ignored during OCR.

Table zones

Table zones must be rectangular. During auto-zoning, the program
automatically places row and column dividers. The table tools in the
Zone Info palette become active if the current page contains at least
one table zone. Use the tools to modify dividers in table zones:
Insert rows: Click this, then move the mouse pointer into a table
zone. It will appear
Insert columns: Click this, then move the mouse pointer into a table
zone. It will appear
Press Control and click to insert a divider only in the current row.
Move dividers: Click this, then move the mouse pointer into a table
zone. When it reaches a divider it appears as
the pointer to move the selected divider. You cannot drag a divider
beyond its neighbor. Avoid placing dividers very close together and do
not let them cut through texts.
Remove dividers: Click this, then move the mouse pointer into a table
zone. When it reaches a divider it appears as
the indicated horizontal or vertical divider.
Remove/Replace All: Click this, then move the mouse pointer into a
table zone. It appears as
The mouse pointer becomes
automatically redetected in the table zone.
. Each click inserts a horizontal row divider.
. Each click inserts a vertical column divider.
. Click to remove all dividers in the table.
. Click again to have dividers
Creating and modifying zones
Chapter 3
or . Click and drag
or . Click to delete
49