Setting Up Your Scanner With Omnipage Pro - ScanSoft OMNIPAGE PRO 10 User Manual

Setting Up Your Scanner With OmniPage Pro

Installation and Setup
To install OmniPage Pro:
1 Insert OmniPage Pro's CD-ROM in the CD-ROM drive.
The Setup program should start automatically. If it does not
start, locate your CD-ROM drive in Windows Explorer and
double-click the Setup.exe program at the top-level of the
CD-ROM.
2 Follow the instructions on each screen to install the software.
During installation, you may be prompted to enter a serial
number. You can find your serial number on the label of the
CD-ROM envelope.
Caere Scan Manager is installed during OmniPage Pro installation. This
sets up your scanner so you can use it with OmniPage Pro. During
installation, Caere Scan Manager prompts you to select your scanner
manufacturer and model.
Read the Scanner Setup Notes for more information on Caere Scan
Manager and supported scanners. Choose Scanner Setup Notes in the
Help menu after OmniPage Pro has been installed.
After installation, you can use Caere Scan Manager to set up additional
scanners with OmniPage Pro and change various scanner settings.
Caere Scan Manager is located in the Windows Control Panel.
To open Caere Scan Manager:
1 Click Start in the Windows taskbar and choose Settings !
Control Panel.
2 Double-click the Caere Scan Manager icon.
Setting Up Your Scanner With OmniPage Pro
3