Operation; Quick Start; Connect The Power; Connect The Input Sources - PRESONUS MONITOR STATION - V1.0 User Manual

2.1 QUICK START

The Monitor Station Quick Start guide was written to help get your Monitor Station connected to your system as
quickly as possible. The following step-by-step instructions are based on a common studio environment. Your
actual setup may change based on your needs and applications.

2.1.1 Connect the power

Before connecting any power supply to the Monitor Station, ensure the power supply meets the input
voltage requirements of the region or country you are using it in. PreSonus only supports the power supply
shipped along with your Monitor Station. If it does not meet your requirements or you wish to purchase an
additional power supply, please contact your local dealer or distributor.
1) "Zero" the Main, Cue and Phones level knobs by turning them fully counterclockwise.
If you have speakers or gear connected to the Main L/R outputs, you should also Zero them.
2) Ensure the power switch is set to the 'OFF' position ( O down = off ).
3) Connect the included power supply to the Monitor Station's power input connector and to the
appropriate wall socket.
4) Flip the power switch to the 'ON' position ( | down = on ).

2.1.2 Connect the input sources

1) "Zero" the Main, Cue and Phones level knobs by turning them fully counterclockwise.
2) Connect your primary audio source (such as a DAW or Mixer Main Outputs) to the Left and Right
TRS inputs of ST1 on the back of your Monitor Station.
[Optional]:
3)
(such as the auxiliary outputs of your interface or Mixer) to the Left and Right TRS inputs of ST2
on the back of your Monitor Station.
[Optional]:
4)
RCA inputs of Aux/Phono.

OPERATION

Connect your secondary audio source (such as a CD or mp3 player) or cue audio source
Connect another secondary or Cue audio source or a DJ turntable to the Left and Right
5