PRESONUS AUDIOBOX USB - V 2.0 User Manual page 17

GETTING STARTED
STEP 5
STEP 6
Click on the Inputs tab in the Audio I/O Setup window, and you will
see all of the available inputs on your AudioBox USB. At this time,
you can add the number and type of inputs you plan to use. We
recommend that you create a mono input for both of the inputs on
your AudioBox USB. If you plan on recording in stereo, you should
also create a stereo bus and assign it to the appropriate set of
inputs. You can remove any bus by simply selecting it, then clicking
the remove button. To customize the name of your buses, double
click on the default name to open a text box. When you have
finished typing, hit Enter. If you would like the same inputs to be
available every time you launch Studio One Artist, click the "Make
Default" button.
Click on the Outputs tab, and you will see all of the available
outputs on your AudioBox USB. At this time, you can add the
number of output buses to which you would like to have access and
can give them custom names.
In the lower right corner, you will see the Audition select menu.
This allows you to choose the ouput from which you will audition
audio files prior to importing them into Studio One Artist. In
general, you will want this to be the Main Out bus.
If you would like this output configuration available every time you
launch Studio One Artist, click the Make Default button.
16 | PreSonus 2008