Flow Of Installation - Sanyo PDG-DHT100L - DLP Projector - HD 1080p Owner's Manual

Chapter 2 Installation

Flow of installation

The following are instructions for attaching this product to the projector and connect-
ing it to the network. Please review the entire procedure to become familiar with it.
1
Function of the Network Board
Check the contents of a package. This product contains a network board,
owner's manuals (2 books), a ferrite core and 2 screws. Also check the name
and function of each part.
2
Installation and network configuration
1
Mount this product onto the projector.
2
Connect the LAN cable and join it to the network.
3
Configure the network of the Network Board.*
4
Set the password.*
*1
The procedure of the network setting up and network PIN code/Password
may differ from the actual depending of the projector's model types.
See pages 16 to 19 for the case "Projector provides the Network main menu".
See pages 20 to 22 for the case "Projector provides the Network sub menu in
the Setting main menu".
The preparation to control the projector connected to the network is completed. At the
next step, set up and control the projector via the network by using the web browser
installed on your computer. Please see chapter 3 "Basic setting and operation". (
12
1
Set up is completed.
( p.13)
( p.14-23)
1
p.25)