Table of Contents
Advertisement
Installation
Flow of installation
The following are instructions for attaching this product to the monitor and connecting it to
the network. Please review the entire procedure to become familiar with it.
1
Check package
Please check the contents of a package. This product contains a network board, an
interface cable, and an owner's manual (this manual). Also please check the name
and function of each part.
2
Installation
1. Mount this product onto the monitor and connect the interface cable between this
product and the monitor.
2. Set the option switch on the monitor to the top (Net-Organizer mode).
3. Connect the LAN cable and join it to the network.
3
Network configuration
Configure the network with the computer.
The preparation is completed to control the monitor connected to the network. At next step,
set up and control the monitor via the network by using the web browser installed on your
computer. Please see "Basic setting and operation" on page 21.
8
(p.9)
(p.10-12)
Setting up is completed.
(p.13-20)
Advertisement
Table of Contents
