Sanyo PDG-DHT100L - DLP Projector - HD 1080p Owner's Manual page 47

When the Picture in Picture mode is ON, there are some restrictions as follows;
- The last memorized input source is displayed in Input menu.
- "PC Adjustment", "System Adjustment" and "Save Adjustment" are invalid.
Item Description
HD data wireless ......Sets the HD data wireless
board.
Mode select ......Switches the communication
mode (Single mode or
Broadcast mode).
Authentication ....Executes or resets the authen-
tication at the Single mode.
ID input ..............Inputs ID number at the broad-
cast mode.
Reset ................Restore the value of the HD
data wireless setting items to
the factory default value.
* There may not be available depending on the
projector's model type.
Item Description
......Sets the "P in P" or "P by P"
Picture in Picture
mode which has been preset in
the setting menu. (OFF, User1
- User5)
Edge blending....Sets the seamless overlapping
for multi-screen.
Color matching ..Corrects the difference of color
for multi-screen.
DynamicBlack ....Improve the black level of the
image. (OFF/Low/High)
HDMI setup........Switches Normal or Enhanced
according to the HDMI source.
* There may not be available depending on the
projector's model type.
Control the Projector
47
Network Board
OWNER'S MANUAL