Control The Projector; Input - Sanyo PDG-DHT100L - DLP Projector - HD 1080p Owner's Manual

Chapter 4 Controlling the Projector

Control the projector

The control menus are displayed on the upper side of the page. When you click each
control icon, the control page is displayed according to the control menu you select-
ed. The setting method differs depending on the contents of the page. Click on the
page number linked texts to change pages and select desired setting items.
Please see the owner's manual of the projector to have the further information of
each control item.
If the adjustment items are not required by the projector itself or input signal, the
mark of "--" may be indicated.
The control page displays valid control items depending on the selected input mode, signal or
functions of the projector you use, therefore, there may be different controls between the
described items and actual control items on the page display.
When the projector is in standby, only the timer on the setting menu is effective; others are
inactive.

Input

This function is to select the input mode and slot to the projector. Select
the input slot with the radio button, and input source mode with the pull-
down menu button. Then set the selected input source and source mode
by pressing the Set button.
Select a slot with
radio buttons.
38
Select a source
mode with pull-down
menu.
Mounted Board name
Item Description
Input(SLOT) ......Displays input number and
board name installed in the pro-
jector. The setting items differ
from the actual depending on
the board function.
* Available slots and indications may differ from the
actual depending on the projector's model type.