Epson AP-60 - Projector Sound Solution Installation Manual page 17
Installation guide
Hide thumbs
Also See for AP-60 - Projector Sound Solution:
- User manual (28 pages) ,
- Manual (5 pages) ,
- Brochure & specs (4 pages)
Table of Contents
Advertisement
10 Secure the two screws that hold the audio control panel in place.
11 Attach the IR dome sensor cable to the top of the AP-60.
12 Once the cables are positioned as desired, lift the AP-60 and secure the lower bracket with the M10 bolt and
nut.
13 Tighten the M47.5 jam nut until it's flush with the lower bracket.
17
Advertisement
Table of Contents
