Epson 826W - PowerLite WXGA LCD Projector Getting Started Manual page 8

note
Projector users or presenters
can end the message
broadcast at any time by
pressing the Esc button on
the projector or remote
control. The following
reminder is displayed in the
lower left corner of the
screen: [ESC]: Close
Message Broadcasting.
Once the Esc button is
pressed, the projector will
not receive broadcast
messages until it is restarted.
Message Broadcasting
8
You see your schedule in the Timer Settings window:
12. To set the message end time, click
select
Message Broadcasting end
click . You must set the end time; otherwise, your message
OK
broadcast will continue indefinitely.
You can use the buttons at the bottom of the screen to enable,
disable, edit, or delete your timer settings.
13. When you are finished adjusting timer settings, click
save the settings.
, select the time, then
Add
in the box and
Operation
Close
to